4:Preventing the TV from toppling over
After all connections are completed, secure the TV.
1 Fasten the supplied support belt to the stand with a screw.
2 While supporting the TV, tighten the supplied support belt to adjust the length.
3 Fit the supplied support belt to the TV stand, then firmly fasten with the supplied screw using a screw driver or coin, etc.
3
2
1
5: Switching on the TV
2
1
SONY
1 Connect the TV to your mains socket (220- 240V AC, 50Hz).
2 Press 1 on the TV (top side).
When you switch on the TV for the first time, the message confirming the TV start
When the TV is in standby mode (the 1 (standby) indicator on the front of the TV is red), press TV +/1 on the remote to switch on the TV, then go to “6:
12