Features menu
Features
Power Saving | Standard |
Light Sensor | On |
AV2 Output | TV |
TV Speakers | On |
PC Adjustment |
|
|
|
Select: | Set: OK Back: | End: MENU |
You can select the options listed below on the Features menu. To select options, see “Navigating through menus” (page 19).
Power Saving
1
2
Press OK to select “Power Saving”.
Press m/M to select one of the following, then press OK.
•Standard: Default settings.
•Reduce: Reduces the power consumption of the TV.
•Picture Off: Switches off the picture. You can listen to the sound with the picture off.
Light Sensor
Automatically optimizes the picture settings according to the ambient light in the room.
1
2
Press OK to select “Light Sensor”.
Press m/M to select “On” then press OK.
AV2 Output
Sets a signal to be output through the socket labelled 
/
2 on the rear of the TV. If
you connect a VCR to the 
/
2 socket, you can then record from the equipment connected to other sockets of the TV.
1
2
Press OK to select “AV2 Output”.
Press m/M to select one of the following, then press OK.
•
•
• AV1: Outputs signals from equipment connected to the | / |
| 1 socket. | |
| ||||
• AV4: Outputs signals from equipment connected to the |
| 4/ | 4 socket. | |
• Auto: Outputs whatever is being viewed on the screen. |
|
|
|
|
26