Option

Description

 

 

Programme

Presets programme channels manually.

 

1

Press M/m to select “Programme”, then press OK.

Channel

 

2

Press M/m to select the programme number you want

 

 

to manually tune (if tuning a VCR, select channel 0),

 

 

then press <.

 

3

Press M/m to select “Channel”, then press OK.

 

4

Tune the channels as follows:

 

 

If you do not know the channel number (frequency)

 

 

Press M/m to search for the next available channel. When a

 

 

channel has been found, the search will stop. To continue

 

 

searching, press M/m.

 

 

If you know the channel number (frequency)

 

 

Press the number buttons to enter the channel number of the

 

 

broadcast you want or your VCR channel number.

 

5

Press OK.

 

6

Press OK to select “Confirm”, then press OK.

 

Repeat the procedure above to preset other channels manually.

 

 

Label

Assigns a name of your choice, up to five letters or numbers, to the

 

selected channel. This name will be displayed briefly on the screen

 

when the channel is selected.

 

1

Follow steps 3 to 5 of “Programme Labels” (page 30).

 

2

Press OK to select “Confirm”, then press OK.

 

 

AFT

Fine-tunes the selected programme number manually if you feel

 

that a slight tuning adjustment will improve the picture quality.

 

(Normally, fine tuning is performed automatically.)

 

1

Press M/m to adjust the fine tuning over a range of -15

 

 

to +15, then press OK.

 

2

Press “OK” t wice.

 

To restore automatic fine tuning, select “On” in step 1.

 

 

Audio Filter

Improves the sound for individual channels in the case of distortion

 

in mono broadcasts. Sometimes a non-standard broadcast signal

 

can cause sound distortion or intermittent sound muting when

 

watching mono programmes.

 

1

Press m/M to select “Low” or “High”, then press OK.

 

 

If you do not experience any sound distortion, we recommend

 

 

that you leave this option set to the factory setting “Off”.

 

2

Press OK to select “Confirm”, then press OK.

Note

You cannot receive stereo or dual sound when “Low” or “High” is selected.

Menu the Using

Continued

31