6: Auto-tuning the TV

When you switch on the TV for the first time, the message confirming the TV start auto-tuning appears on the screen.

You must tune the TV to receive channels (TV broadcasts). Do the following to search and store all available channels.

1

4

1 Press OK to select “Yes”.

 

 

 

 

 

 

Getting

Do you want to start

 

 

automatic

tuning ?

 

 

 

 

 

 

 

Started

 

Yes

 

 

No

 

 

 

 

 

 

 

 

 

m

 

 

 

Digital auto-tune display

Number of Services found 14

Searching.

40%

m

Analogue auto-tune display

The TV starts searching for all available digital channels followed by all available analogue channels. This may take some time, please be patient and do not press any buttons on the TV or remote.

Once all available digital and analogue channels have been stored, the TV returns to normal operation, displaying the digital channel stored on channel number 1. If no digital channels are found, the analogue channel stored on channel 1 is displayed.

When a message appears for you to confirm the aerial connections

No digital or analogue channels are found. Check all the aerial connections and press OK twice to start auto-tuning again.

2 The Programme Sorting menu appears on the screen.

Note

If some digital channel is found, this step will not appear

3 To change the order in which the channels are stored on the TV. See page 29.

4 Press MENU to exit.

The TV has now tuned in all the available channels.

13