Connecting the TV

zYou can also access information about your CableCARD device in the Applications settings (see page 91).

Removing the CableCARD Device

CAUTION: Inserting the CableCARD device incorrectly may result in permanent damage to the card and the TV.

2Gently push the card into the slot until it locks into place, and then reattach the cover.

3After 1-2 minutes, the CableCARD device setup screen is automatically displayed. This screen includes information your cable TV company will request before they can activate your service.

4Follow the displayed instructions: Phone your cable TV company. A representative will guide you through the activation process.

5After your CableCARD device is activated, your cable TV company will download the service information, including the channel list, to the CableCARD device. After the CableCARD device has acquired channels from your cable TV company, the TV tunes to the lowest available channel.

In the event you want to cancel your service, contact your cable TV company.

Once the CableCARD device is removed, your TV will no longer decrypt digital cable TV programming services that require CableCARD device.

1Push the eject button on the TV’s CableCARD slot to release the card.

AUDIO

RGB

 

PC

 

IN

7

CableCARD

Eject button

2Pull the CableCARD device straight out of the slot to remove it.

To install a different CableCARD device, follow the instructions in “Activating CableCARD Service” on page 29.

30