Set Up menu

Set Up

Auto Start Up

Auto Tuning

Programme Sorting

Programme Labels

AV Preset

Manual Programme Preset

Digital Set Up

Select:

Set: OK Back:

End: MENU

Auto Start Up

You can select the options listed below on the Set Up menu. To select options, see “Navigating through menus” (page 19).

Starts the “first time operation menu” to tune in all available digital and analogue channels. Usually, you do not need to do this operation because the channels will have been already tuned when the TV was first installed (page 13). However, this option allows you to repeat the process (e.g., to retune the TV after moving house, or to search for new channels that have been launched by broadcasters).

1 Press OK to select “Auto Start Up”.

2 Press OK to select “Yes”.

The auto-tune display appears on the screen.

3 Follow steps 1 to 3 of “6: Auto-tuning the TV” (page 13).

Auto Tuning (Analogue mode only)

Tunes in all the available analogue channels.

Usually you do not need to do this operation because the channels are already tuned when the TV was first installed (page 13). However, this option allows you to repeat the process (e.g., to retune the TV after moving house, or to search for new channels that have been launched by broadcasters).

1 Press OK to select “Auto Tuning”.

2 Follow step 1 of “6: Auto-tuning the TV” (page 13).

When all available analogue channels have been tuned, the TV returns to normal operation.

Programme Sorting (Analogue mode only)

Changes the order in which the analogue channels are stored on the TV.

1 Press OK to select “Programme Sorting”.

2 Press M/m to select the channel you want to move to a new position, then press OK.

3 Press M/m to select the new position for your channel, then press OK.

Repeat the procedure in steps 2 and 3 to move other channels if required.

Continued

Menu the Using

29