Option

Description

Programme

Presets programme channels manually.

 

1

Press M/m to select “Programme”, then press OK.

Channel

 

2

Press M/m to select the programme number you want

 

 

to manually tune (if tuning a VCR, select channel 0),

 

 

then press <.

 

3

Press M/m to select “Channel”, then press OK.

 

4

Press ,.

 

5

Tune the channels as follows:

 

 

If you do not know the channel number (frequency)

 

 

Press M/m to search for the next available channel. When a

 

 

channel has been found, the search will stop. To continue

 

 

searching, press M/m.

 

 

If you know the channel number (frequency)

 

 

Press the number buttons to enter the channel number of the

 

 

broadcast you want or your VCR channel number.

 

6

Press OK.

 

7

Press m to select “Confirm”, then press OK.

 

8

Press m to select “OK”, then press OK.

 

Repeat the procedure above to preset other channels manually.

 

 

Label

Assigns a name of your choice, up to five letters or numbers, to the

 

selected channel. This name will be displayed briefly on the screen

 

when the channel is selected.

 

1

Follow steps 3 to 5 of “Programme Labels” (page 30).

 

2

Press m to select “Confirm”, then press OK.

 

3

Press m to select “OK”, then press OK.

 

 

AFT

Fine-tunes the selected programme number manually if you feel

 

that a slight tuning adjustment will improve the picture quality.

 

(Normally, fine tuning is performed automatically.)

 

1

Press M/m to adjust the fine tuning over a range of -15

 

 

to +15, then press OK.

 

2

Press m to select “Confirm”, then press OK.

 

3

Press m to select “OK”, then press OK.

 

To restore automatic fine tuning, select “On” in step 1.

 

 

Audio Filter

Improves the sound for individual channels in the case of distortion

 

in mono broadcasts. Sometimes a non-standard broadcast signal

 

can cause sound distortion or intermittent sound muting when

 

watching mono programmes.

 

1

Press M/m to select “Low” or “High”, then press OK.

 

 

If you do not experience any sound distortion, we recommend

 

 

that you leave this option set to the factory setting “Off”.

 

2

Press m to select “Confirm”, then press OK.

 

3

Press m to select “OK”, then press OK.

Note

You cannot receive stereo or dual sound when “Low” or “High” is selected.

Menu the Using

Continued

31