Sony KDL-W40A12U Digital Set Up

Option	Description
Skip	Skips unused analogue channels when you press PROG +/- to
	select channels. (You can still select a skipped channel using the
	number buttons.)
	1	Press M/m to select “Yes”, then press OK.
	2	Press m to select “Confirm”, then press OK.
	3	Press m to select “OK”, then press OK.
	To restore a skipped channel, select “No” in step 1.
ATT	Attenuates the RF signal. In case of a strong RF signal, some video
	interference may be displayed.
	1	Press M/m to select “On”, then press OK.
	2	Press m to select “Confirm”, then press OK.
	3	Press m to select “OK”, then press OK.
	Note
	When “ATT” is set to “On”, picture noise may occur during VCR
	recording when turning on/off the TV or selecting a TV channel.
	In this case, connect your aerial to the input socket on your VCR, then
	connect the output socket on your VCR to the		socket on the rear of
	the TV. Confirm that the VCR can record the digital channels.

Digital Set Up

Displays the “Digital Set Up” menu. You can change/set the digital settings using this menu.

1

2

Press OK to select “Digital Set Up”.

Press M/m to select the desired icon below, then press OK.

Digital Tuning

Digital Auto Tuning

Programme List Edit

Digital Manual Tuning

Back: Select: Enter: OK

Digital Tuning menu

3 Press M/m to select one of the following options, then press OK.

Option		Description
Digital Tuning		Tunes in all the available digital channels.
		Usually you do not need to do this operation because the channels
	Digital Auto
		are already tuned when the TV was first installed (page 13).
	Tuning
		However, this option allows you to repeat the process (e.g., to
		retune the TV after moving house, or to search for new channels
		that have been launched by broadcasters).
		1 Press OK to start digital auto-tuning.
		When all available digital channels have been tuned, a message
		stating that the auto-tuning process is finished appears.
		2 Press < .

32