Push and slide to open
,

Basic Operations

Remote Control

ButtonDescription

1TV/VIDEO Press repeatedly to cycle through the video inputs.

✍See page 60 for information on setting up the video input labels, including the Skip function.

2 SLEEP

Press repeatedly until the TV displays the time in minutes (Off,

 

15, 30, 45, 60, 90 or 120) that you want the TV to remain on

 

before shutting off. To cancel Sleep, press SLEEP repeatedly

 

until Off appears.

3FUNCTION Buttons

The FUNCTION button indicator lights up momentarily when pressed to show which external equipment the remote control is operating. When the remote control is set to operate the external equipment, these buttons will operate the equipment you choose. You must first press one of these FUNCTION buttons to operate the corresponding equipment. See page 32 for programming the remote control.

BD/DVD

40 - 9, ENT Press 0-9to select a channel; the channel changes after two seconds. Press ENT to change channels immediately.

5

Use with the 0-9and ENT buttons to select digital channels.

 

For example, to enter 2.1, press 2 , , 1 and ENT.

 

 

6 JUMP

Press to jump back and forth between two channels. The TV

 

alternates between the current channel and the last channel that

 

was selected.

 

 

7 ANT

Press to change between the VHF/UHF input and the CABLE

 

input.

8SURROUND Press to select TruSurround XT audio effect or Off to turn this feature off. See page 52.

9 SOUND

Press to cycle through different sound settings: Dynamic for

 

enhanced treble and bass, Standard for spoken dialog and

 

Custom for flat setting.

 

 

✍The 5 button, CH + button and PLAY button have a tactile dot. Use the tactile dot as a reference when operating the TV.

✍ Insert two size AA (R6) batteries (supplied) by matching the e and E on the batteries to the diagram inside the remote control’s battery compartment.

✍ When you use the remote control, point it at the infrared receiver. See page 37 for the location of the infrared receiver.

28