| Other Information |
|
|
Problem | Possible Remedies |
On a | ❏ The TV might be connected to the wrong feed. To test this, try changing the feed |
(“A” and “B” feed), the Guide | when you leave the TV in standby mode (i.e. when you turn the TV off using the |
collects data intermittently | POWER button on the remote control or front panel of the TV) to receive the |
| updated Guide data. The Guide only updates data on the feed that originally |
| collected the data. For example, if the Guide collected data on the “A” feed, then |
| you must leave the TV on the “A” feed when you put it in standby mode. If you |
| left the TV on the “B” feed in this example, the Guide would not be able to update |
| any data. |
| ❏ If, after trying both feeds, the Guide still does not have data, please contact Sony. |
|
|
Remote Control
Problem | Possible Remedies |
Remote control does not | ❏ The batteries could be weak. Replace the batteries. |
operate | ❏ Check the orientation of the batteries. |
| ❏ Press TV (FUNCTION) once, and the TV indicator lights up. You may have |
| inadvertently pressed SAT/CABLE (FUNCTION), which changes the remote |
| control to SAT or CABLE mode. |
| ❏ Make sure this unit’s power cord is connected securely to the wall outlet. |
| ❏ Fluorescent lamps can interfere with remote control operation; try turning off the |
| fluorescent lamps. |
| ❏ Keep the remote control sensor area clear from obstacles. |
| ❏ If the “WARNING: TV temperature is high.” message appears, turn off the TV |
| and wait until the TV’s projection lamp cools down (approximately 5 minutes). If |
| the remote control still does not work, make sure to dust the ventilation slots on |
| the rear of the TV and the cooling fan to provide adequate ventilation around the |
| TV. |
|
|
Cannot change channels with | ❏ If you are using the TV to change channels, first press TV (FUNCTION) once, |
the remote control | and the TV indicator lights up. |
| ❏ If you are using another device to change channels, be sure you have not |
| inadvertently switched your TV from the channel 3 or 4 setting. |
| ❏ If you are using another device to change channels, be sure to press FUNCTION |
| for that device. For example, if you are using your cable box to change channels, |
| be sure to press SAT/CABLE (FUNCTION) once, and the SAT/CABLE indicator |
| lights up. |
Information Other
Remote control does not operate
❏If you replaced the batteries to the remote recently, the code numbers for the video equipment may need to be reset.
❏There may be more than one code for the equipment that you are attempting to operate.
❏There is a possibility that some
71