Connecting Audio Equipment to the TV

Conect your audio equipment to the audio output sockets Dif you wish to amplify the audio output from TV. Next

,using the menu system, select the “Sound Adjustment” menu and set the “TV Speakers” to “One time off” or "Permanent off" (see page 15).

The volume of the external speakers can be altered by pressing the volume buttons on the remote control. The Treble and Bass settings can also be altered through the “Sound Adjustment” menu (see page 14).

To enjoy “Dolby Virtual” sound effect through your audio equipment

Place the speakers of your equipment in front of your listening position and beside the TV set, keeping a distance of 50 cm between each speaker and the TV set.

Then by using the menu system, select the menu “Sound Adjustment”. Next select “Dolby Virtual” on the “Sound Effect” option (see page 14).

Hi-Fi speakers

~50°

GB

Your sitting position

Viewing pictures from equipment connected to the

TV

1Connect your equipment to the designated TV socket, as indicated in the previous page.

2Switch on the connected equipment.

3To watch the picture of the connected equipment, press the button repeatedly until the correct input symbol appears on the screen.

Symbol

Input Signals

 

 

 

 

1

• Audio / video input signal through the Scart connector G

 

 

1

• RGB input signal through the Scart connector G. This symbol appears only if an

 

 

 

 

 

RGB source has been connected.

 

 

2

• Audio / video input signal through the Scart connector F.

 

2

• RGB input signal through the Scart connector F. This symbol appears only if an

 

 

 

 

 

RGB source has been connected.

3 • Audio/video input signal through the Scart connector E.

S3 • S Video Input signal through the Scart connector E. This symbol appears only if an S Video source has been connected.

4 • Video input signal through the phono socket Band Audio input signal through C.

S4 • S Video Input signal through the front S Video input jack Aand Audio signal through C. This symbol appears only if an S Video source has been connected.

5 • RGB input signal through the PC connector Hand I.

4Press the button on the remote control to return to the normal TV picture.

For Mono Equipment

 

Connect the phono plug to the L/G/S/I socket on the front of the TV and select

4 or S 4 input

signal using the instructions above. Next, refer to the “Sound Adjustment” section of this manual and set “Dual Sound” option to “A” on the sound menu screen (see page 14).

Additional Information 25