Sony KF-50SX100 On:, AV1, AV2, AV3, AV4, MENU, Main, Off:, Off:, Full:, 4 Off, 10 min, 20 min, Speaker, Normal:, Features, Features, $ 90 min, Centre In, AV2 Output

Menu System

Using the Features Menu

Using the Features menu you can:

a)Select if you want to listen to the sound from the set directly or through an external amplifier.

b)Adjust automatically the size of picture.

c)Select a time period after which the set switches itself into standby mode.

d)Lock the buttons on the set. In this way, the set only works by using the remote control buttons.

e)Select the source to be output from the Scart connector :2/q2 (SMARTLINK). In this way you can record from this scart connector while watching another source. If your VCR supports Smartlink, this procedure is not necessary.

VIDEO TV

1 2 3

4 5 6

7 8 9

0

PROGR

MENU

RM 903

S

1 Press the MENU button on the remote control to display the menu on the screen.

2 Push the joystick $ to select thesymbol, then push z to enter to the Features menu.

3 Push the joystick $ or 4 to select the desired menu item, then push zto enter (see the table below for the effect of each menu item).

4 Push $ or 4 to select the desired setting and press the OK button to store.5 Press the MENU button to exit and return to the normal TV screen.

Features		Effect / Operation
Speaker	$ Main (sound from the set)
	4	Centre In (sound from external amplifier)
Auto Format	$ Off: Size of picture is not automatically adjusted.
(only for aerial		Normal: Size of picture is automatically adjusted
signal)		according to the broadcaster information.
	4	Full: The set automatically adjusts the picture size
		to eliminate any dark areas on the TV picture (as
		shown on the section “Changing the Screen
		Format)”.
Format Correction	$ Off: 4:3/14:9 is selected.
(only if Auto Format	4 On: Smart mode is selected automatically for
is set to “Normal”
or “Full”)		4:3/14:9 broadcast.
Sleep Timer	4 Off
		10 min.
		20 min.
		...
	$ 90 min.
		• One minute before the set switches into standby
		mode, the time remaining is displayed on the
		screen automatically.
		• When watching the TV, press the		button on
		the remote control to display the time remaining.
		• To return to normal operation from standby
		mode, press the TV	button on the remote
		control.

Parental lock $ Off (Normal mode)

4On (The set can only be switched on using the remote control, the buttons on the TV do not work)

AV2 Output	$ TV (audio/video signal from the aerial)
	AV1 (audio/video signal from the Scart
	connector :1/	).

AV2 (audio/video signal from the Scart connector :2/q2 (SMARTLINK).

AV3 (audio/video signal from the Scart connector :3/q3).

4 AV4 (audio/video signal from the connector … 4 placed in the front of the set).

If you have connected a decoder, please remember to change back the AV2 Output to "TV" for correct unscrambling.

Picture Adjustment
Picture Mode		Personal
Contrast
Brightness
Colour
Sharpness
Reset
AI				On
Noise Reduction				Off
Colour Tone			Normal
Select:	Enter Menu:

Features
Speaker		Main
Auto Format
		Normal
Format Correction		On
Sleep Timer		Off
Parental Lock		Off
AV2 Output		TV
Select:	Enter:

Speaker
	Main
	Centre In

Auto Format	Off
	Normal
	Full

Format Correction	Off
	On

Sleep Timer 10 min

Parental Lock
	Off
	On

AV2 Output	TV
	AV1
	AV2
	AV3
	AV4

14 Menu System