Video2(Component) TV Video
Selects the type of the video jack to be used from those on the left side of the TV.
Press M/m to select one of the following, then press .
Auto: Activates the component video jacks (Y, PB/CB, PR/CR), however, the composite video jack is selected when the component video jacks are not connected.
Off: Activates the composite video jack ().
Power Saving TV Video PC
Reduces the power consumption of the TV.
Press M/m to select one of the following, then press .
Standard: No benefit of Power Saving.
Reduced: To view pictures with reduced power consumption.
Picture Off: To turn off the picture. You can listen to the sound at the volume you select.
Tip
You can also select the power saving mode by pressing POWER SAVING repeatedly.
Light Sensor TV Video PC
Automatically optimizes the picture settings according to the ambient light in the room.
Press M/m to select “On”, then press .
Cinema Drive TV Video
Provides an optimized display by automatically detecting the film content. Moving pictures will appear clearer and more
Press M/m to select “Auto”, then press .
Tip
You can select this option for NTSC system pictures only.
Color System TV Video
Sets the color system of the TV to that of the source you want to play back.
Press M/m to select the color system, then press .
Usually select “Auto” so that an appropriate color system for the source is selected automatically.
Initial Reset TV Video
Resets all the manual settings to the factory settings.
Press < to select “Ok”, then press . Repeat this operation again.
Settings Using