Installing and Connecting the Projection TV

 

 

Connection

Description

 

 

1 AUX

Allows you to view local and cable channels if your cable

 

provider does not feature local channels. You can switch

 

between local and cable channels easily by pressing ANT

 

on the remote control. Devices connected to the AUX

 

input cannot be viewed in Twin View.

2TO CONVERTER This is a VHF/UHF OUT jack that lets you set up your projection TV to switch between scrambled channels (through a cable box) and normal cable channels (CATV). Use this jack instead of a splitter to get better picture quality when switching between scrambled and unscrambled cable channels.

3 VHF/UHF

Connects to your VHF/UHF antenna or cable.

 

 

4 S VIDEO

Connects to the S VIDEO OUT jack of your VCR or other

(Rear and front/

S VIDEO-equipped video component. Provides better

side)

picture quality than the VHF/UHF jacks or the Video IN

 

jack.

 

 

5 VIDEO

Connects to the audio and video OUT jacks on your VCR

(L/R)/AUDIO

or other video component. A fourth video input (VIDEO

(Rear and front/

2) is located on the side panel (for KP-43HT20) or the

side)

front panel (for KP-53HS20, KP-53HS30, KP-61HS20

 

and KP-61HS30) of the projection TV.

 

 

6 Y/PB/PR

Connects to your DVD player’s or Digital Set-top box’s

(L/R)/AUDIO

component video (Y, PB, PR) and audio (L/R) jacks.

 

 

7 TV OUT

Connects to an AV receiver for greater control of all audio

 

and video equipment (see page 30). For detailed

 

information about connection, refer to the operating

 

manual supplied with the AV receiver.

 

 

8 AUDIO OUT

Connects to the left and right audio inputs of your audio or

(VAR/FIX)

video component.

L (MONO)/R

 

9CONTROL S To control other Sony equipment with the projection TV's

IN/OUT

remote control, connect the CONTROL S IN jack of the

 

equipment to the CONTROL S OUT jack on the

 

projection TV with the CONTROL S cable.

 

To control the projection TV with a remote control for

 

another Sony product, connect the CONTROL S OUT

 

jack of the equipment to the CONTROL S IN jack on the

 

projection TV with the CONTROL S cable.

 

 

TV Projection the Connecting and Installing

15