Other Information

Programming the Remote Control

The remote control is preset to operate Sony brand video equipment.

Sony

Switch Position

Programmable

Equipment

on Remote Control

Code Number

 

 

 

Beta, ED Beta VCRs

AV1

303

 

 

 

8 mm VCR

AV2

302

 

 

 

VHS VCR

AV3

301

 

 

 

DVD Player

DVD

751

 

 

 

If you have video equipment other than Sony brand that you want to control with the projection TV’s remote control, use the following procedures to program the remote control.

✍The equipment must have infrared (IR) remote capability in order to be used with the remote control.

From the “Manufacturer’s Codes” listed on page 67, select the three-digit code number for the manufacturer’s code for your component. If more than one code number is listed, start with the number listed first. Use the code number to complete the following procedure.

To program a cable box or a satellite receiver

1

2

3

4

5

6

Open the panel of the remote control.

Press CODE SET inside the panel.

Close the panel and press SAT/CABLE (FUNCTON).

Enter the three-digit manufacturer’s code number using the 0-9buttons.

Press ENTER.

To check if the code number works, aim the projection TV’s remote control at the component and press the green POWER button that corresponds with that component. If it responds, the programming is completed. If not, try using the other codes listed for that manufacturer.

(Continued)

65