Other Information
Problem | Possible Remedies | |
|
| |
You get the same program in the ❏ | Both may be set to the same channel. Try changing channels in either the main | |
window picture as in the main |
| picture or the window picture. |
picture | ❏ | You may be running all your channels through a cable box. The cable box will |
|
| only unscramble one signal at a time, so you cannot use the Twin View feature. If |
|
| possible, run a direct cable to your projection TV’s VHF/UHF input (this will only |
|
| work if your cable system provides an unscrambled signal). |
|
| |
You cannot get anything but TV ❏ | Be sure the video label has not been set to skip your video inputs. See the Setup | |
channels in your second picture |
| menu on page 63. |
|
|
|
Favorite Channel does not | ❏ | Verify that Favorite Channel is set to Manual in the Channel menu (see |
display your choices |
| “Favorite Channel” on page 52). |
|
|
|
Some video sources do not | ❏ | Ensure that Video Label is not set to SKIP (see “Video Label” on page 64). |
appear when you press TV/ |
|
|
VIDEO |
|
|
|
|
|
72