Using the Features
Using the Remote Control
The following table describes the buttons on the remote control that are for more advanced functions.
Button Descriptions
Outside Panel
Button Description
1 MUTING Press to mute the sound. Press again or press VOL + to restore the sound.
2 SLEEP Press repeatedly until the projection TV displays the time in minutes (15, 30, 45, 60, or 90) that you want the projection TV to remain on before shutting off automatically. Cancel by pressing until SLEEP OFF appears or turning the power off. While the Sleep feature is set, press once to view the remaining time.
3 ANT Changes between the VHF/UHF input and the AUX input.
4 DISPLAY Press once to display the current time and channel label (if
|
| set) and channel number. Press again to turn Display off. |
|
| See page 62 for details on setting the time. |
|
| |
5 JUMP | Press to jump back and forth between two channels. The | |
|
| projection TV alternates between the current channel and |
|
| the last channel that was selected. |
|
| |
6 FREEZE | Freezes the window picture. Press again to restore the | |
|
| picture. |
|
|
|
7 | INDEX | Press to enter the Channel Index mode. You can view and |
|
| select from twelve channels without leaving the current |
|
| one. |
|
|
|
8 |
| The joystick allows for movement of the |
|
| Pressing down on the center of the joystick selects the item. |
|
| |
9 VOL | Adjusts the volume. | |
q; PIC MODEPress repeatedly to step through the available video picture modes: Vivid, Standard , Movie and Pro . Also available in the Video menu. For details, see “Selecting Video Options” on page 48.
qa FAVORITESDisplays the Favorite Channels list. For details, see “Using Favorite Channels” on page 40.
qs RESET Press when in a menu to reset the settings to the factory defaults.
34