Notes on Using This Connection

To Do This ...

Do This ...

Watch the satellite receiver

Press TV/VIDEO repeatedly to select the VCR input (VIDEO 1 in the

 

illustration).

 

The VCR may need to be turned on and set to the satellite receiver input.

 

 

Watch the VCR

Press TV/VIDEO repeatedly to select the input to which the VCR is connected

 

(VIDEO 1 in the illustration).

 

 

Set up the TV remote control

If you have a non-Sony VCR or satellite receiver, you must program the

to operate the satellite

remote control. See “Programming the Remote Control” on pages 51-52.

receiver or VCR

 

 

 

Activate the TV remote

For the satellite receiver, press SAT/CABLE FUNCTION. For the VCR, open the

control to operate the satellite

outside cover, as shown on page 50. Then set the A/V slide switch to the

receiver or VCR

position you programmed for the VCR.

 

 

Control satellite receiver and

See “Operating a Satellite Receiver” on page 53 and “Operating a VCR” on

VCR functions with the TV

page 53.

remote control

 

 

 

Label video inputs to easily

See the instructions for setting up Video Labels on pages 83-84.

identify equipment connected

 

to the TV

 

 

 

Setup

SETUP

SETUP

SETUP

SETUP

35