Setting Up the Channel List

After you finish connecting your TV, you need to run Auto Setup to set up your channels. The Auto Setup screen appears when you turn on your TV for the first time after hooking it up. If you do not want to set up the channels at this time, you can do it later by selecting the Auto Program option in the Channel Menu (see page 78).

✍The Auto Setup feature does not apply for installations that use a cable box for all channel selection.

Using Auto Setup

1

Press POWER to turn on the TV.

 

2

Press TV FUNCTION on the remote control.

 

3

To continue running Auto Setup, press CH+. To exit Auto Setup,

 

 

press CH-.

Auto Setup automatically creates a list of receivable channels. When finished, the lowest numbered channel is displayed.

To reset the TV to factory settings

1Press POWER to turn on the TV.

2Hold down RESET on the remote control.

3Press TV POWER on the TV. (The TV will turn itself off, then back on.)

4Release RESET.

Setup

SETUP

SETUP

SETUP

SETUP

43