DVD Player with Use this connection if your DVD player does not have component S VIDEO and Audio video (Y, PB, PR) jacks.

Connectors

To connect a DVD player with A/V connectors

1Use an audio cable to connect the DVD player’s audio output jacks to the TV’s audio input jacks.

2Use an S VIDEO cable to connect the DVD player’s S VIDEO jack to the TV’s S VIDEO jack.

Setup

SETUP

Cables are often

color-coded to connectors.

Connect red to red, white to white, etc.

DVD player

TV

S VIDEO cable

 

Audio cable

Notes on Using This Connection

 

 

 

To Do This ...

Do This ...

Watch the DVD player

Press TV/VIDEO repeatedly to select the DVD input (VIDEO 1 in the

 

illustration).

 

 

Set up the TV remote control

If you have a non-Sony DVD player, you must program the remote control.

to operate the DVD player

See “Programming the Remote Control” on pages 51-52.

 

 

Activate the TV remote

Open the outside cover, as shown on page 50. Then set the A/V slide switch

control to operate the DVD

to the position you programmed for the DVD player.

player

 

 

 

Control DVD functions with

See “Operating a DVD Player” on page 54.

the TV remote control

 

 

 

Label video inputs to easily

See the instructions for setting up Video Labels on pages 83-84.

identify equipment connected

 

to the TV

 

 

 

38