Switching On the Video TV and Automatically Tuning
The first time you switch on your TV, a sequence of menu screen appear on the TV enabling you to: 1) choose the language of the menu screen, 2) search and store all available channels (TV Broadcast), 3) change the order in which the channels (TV Broadcast) appear on the screen and 4) confirm the clock setting.
However, if you need to change any of these settings, you can do that by selecting the appropriate menu in the(Set Up).
The first time you press this button, a Language menu displays automatically on the TV screen.
2 Press the orbutton on the remote control to select the language, then press the OK button to confirm your selection. From now on all the menus will appear in the selected language.
3 The Auto Tuning menu appears on the screen. Press the OK button to select Yes.
4 A new menu appears on the screen asking you to check that the aerial is connected. Ensure the aerial is connected and then press the OK button.
The Video TV starts to automatically search and store all available channels (TV Broadcast) for you.
This procedure could take some minutes. Please be patient and do not press any button. Otherwise the automatic tuning will not be completed.
5 After all available channels are captioned and stored, the Programme Sorting menu appears automatically on the screen enabling you to change the order in which the channels appear on the screen.
a)If you do not wish to change the channel order, press OK and go to step 6.b)If you wish to change the channel order:1Press the PROGR + or - button to select the programme number with the channel (TV Broadcast) you wish to rearrange. This TV Broadcast will appear on the screen.
2Press the orbutton to select the new programme number position for your selected channel (TV Broadcast), then press the OK button.
The word Confirm is highlighted for a few seconds to confirm that the new programme position is stored.
3 Repeat steps b)1 and b)2 if you wish to change the order of the other channels. 4 When you have finished rearranging the order of the channels, press OK.
6 The Video TV automatically adjusts clock setting, and after a few seconds date and time settings will be displayed.
If you want to change the time settings, you can adjust it manually through the menu system (for details, see “Setting the Clock Manually” section of this instruction manual (see page 7).
7 Press the MENU button to remove the menu from the screen.¡ Your Video TV is now ready for use
Language
English
Deutsch
Netherlands
Français
Italiano
Español
Português
Select Language: | OK |
Do you want to start automatic tuning?
Yes
No
OK
Please confirm that aerial is connected
Confirm
OK
Auto Tuning
Programme:01
System:I
Channel:C21
Searching...
Programme Sorting |
| |
Programme: | 01 |
|
Confirm: |
|
|
Select channel: PROG + | - | |
Select new position: |
| |
Exit: OK |
| OK |
Programme Sorting |
| |
Programme: | 02 |
|
Confirm: |
|
|
Select channel: PROG + | - | |
Select new position: |
|
Exit: OK | OK |
Auto Clock Set
Adjusting Clock...
Auto Clock Set
23.09.2000 SAT 12:00
Exit: OK
6 First Time Operation