Changing The Programme Order Of The TV Channels
The “Programme Sorting” option in the “TV Set Up” menu allows you to change the order in which the channels (TV Broadcast) appear on the screen.
To do that: by using the menu system and after selecting the option, press and then proceed in the same way as in the section “Switching On the Video TV and Automatically Tuning” (see step 5b) on page 6).
Manually Tuning The TV
The “Manual Programme Preset” option in the “TV Set Up” menu allows you to preset channels one by one to the programme order of your choice. To do that:
1By using the menu system and after selecting the ”Manual Programme Preset”option, press . Then with Programme option highlighted press . Press or to select on which programme number you want to preset the channel. Then press
.
2 After selecting the Channel option, press . Then press orto select the channel tuning (“C” for terrestrial channels or “S” for cable channels). Next press . After that, press the number buttons to directly enter the channel number of the TV Broadcast. If you do not know the channel number, press orto search for it. When you tune the desired channel, press OK twice to store.
• Repeat all the above steps to tune and store more channels.
Fine Tuning Channels
Normally the Automatic Fine Tuning (AFT) is operating, however by using the “Manual Programme Preset” option in the “TV Set Up” menu you can manually fine tune the Video TV to obtain a better picture reception in the case that the picture is distorted.
To do that: while watching the channel (TV Broadcast) you wish to fine tune, and by using the menu system select the “Manual Programme Preset” option. Press . With the AFT option highlighted, press . Next press orto adjust the fine tuning between
Skipping Programme Positions
The “Manual Programme Preset” option in the “TV Set Up” menu allows you to skip any unwanted programme numbers when they are selected with the PROGR +/- buttons.
To do that: by using the menu system and after selecting the “Manual Programme Preset” option, press . Then with the Programme option highlighted press . Next, press orto select the programme number you want to skip. Press . Then, select the Skip option and press . Next press orto select Yes. Finally press OK twice to confirm and store.
• To cancel this function afterwards, select “No” instead of “Yes” in the step above.
Setting Pay-TV Channels
The “Manual Programme Preset” option in the “TV Set Up” menu allows you to watch
To do that: by using the menu system and after selecting the “Manual Programme Preset” option, press . Then with the Programme option highlighted, press . Next press or to select the programme number with the scrambled channel and press
. Select the Decoder option and press . Next press or to select On. Finally, press OK twice to confirm and store.
•While you are recording a programme which is being recorded through the
Programme Sorting
Programme: 01
Confirm:
Select channel: PROG + -
Select new position:
OK
Manual Programme Preset
Programme: 01
System:I
Channel:C 21
AFT:On
Skip:No
Decoder:Off
Confirm
OK
Manual Programme Preset
Programme: 01
System:I
Channel:C 21
AFT:On
Skip:No
Decoder:Off
Confirm
OK
Manual Programme Preset
Programme: 01
System:I
Channel:C 21
AFT:On
Skip:No
Decoder:Off
Confirm
OK
Manual Programme Preset
Programme: 01
System:I
Channel:C 21
AFT:On
Skip:No
Decoder:Off
Confirm
OK
8 TV Operation