Introducing and Using the Menu System

Your Video TV uses an on-screen menu system to guide you through the operations. Use the following buttons on the Remote Control to operate the menu system:

1 Press the MENU button to switch the first level menu on.2• To highlight the desired menu or option, press or.To enter to the selected menu or option, press .To return to the last menu or option, press .To alter settings of your selected option, press // or .To confirm and store your selection, press OK.3 Press the MENU button to remove the menu from the screen.

Picture Adjustment

The “Picture Adjustment” menu allows you to alter the picture adjustments.

To do that: by using the menu system and after selecting the item you want to alter press

, then press repeatedly // or to adjust it and finally press OK to store the new adjustment.

This menu also allows you to customise the picture mode based on the programme you are watching:

Live (for live broadcast programmes).Movie (for films).Personal (for individual settings).

Brightness, Colour and Sharpness can only be alterated if “Personal” mode is selected.

Hue is only available for NTSC colour signal (e.g: USA video tapes).Select Reset and press OK to reset the picture to the factory preset levels.

Setting The Clock Manually

The “Clock” option in the “Timer” menu allows you to manually set the clock whilst you are in TV mode.

To do that: by using the menu system and after selecting the option press , then :

1With Auto Adjust highlighted, press and next press orto select Off. Next press OK.

2 Select Manual Adjust and press . With the day column highlighted, press or to set the date, then press and proceed in the same way to set the month, year,

hour and minutes. Finally press OK.

It is important you correctly set the clock to use Timer Recording, Quick-Timer recording and On Timer functions.

If power is interrupted or you turn off the Video TV using the main On/off power switch or you disconnect the AC power cord, after 7 days these settings will be cleared.

To automatically set the clock whilst you are in TV mode select “Auto Adjust” “On” in the step above and in the “Programme” option select from which programme number you want to get the time.

Because the Video TV gets clock settings from teletext signals (sent by broadcasters), even though you have selected Auto Adjust “On”, we recommend that you check after Summertime and wintertime that the clock settings are correct, if not adjust it manually.

Automatically Tuning The Video TV

The “Auto Tuning” option in the “TV Set Up” menu allows you to automatically search for and store all available TV channels.

To do that: by using the menu system and after selecting the option, press and then proceed in the same way as in the section “Switching On the Video TV and Automatically Tuning”. (see page 6, steps 3 and 4).

Picture Adjustment

 

Mode: Personal

 

Contrast

 

Brightness

GB

Hue

Colour

 

Sharpness

 

Reset

 

 

OK

Clock

23-09-2000 15:00

Auto Adjust:

 

Off

Clock Programme:

03

Manual Adjust:

 

23 09 2000 SAT 15:00

OK

Do you want to start automatic tuning?

Yes

No

OK

Menu System - TV Operation 7