Operating Instructions

Optional connection

If your VCR is equipped with video outputs, you can get better picture quality by connecting audio/video cables (not supplied) from AUDIO/VIDEO OUT on your VCR to AUDIO/VIDEO IN on your TV.

For better picture quality, use S VIDEO instead of the yellow video cable. S VIDEO does not provide sound; you still must connect the audio cables.

Connecting a TV and Satellite Receiver

From

Rear of TV

 

 

 

 

 

cable/

 

 

 

antenna

1

3

4

2

1

Satellite Receiver

 

Satellite antenna cable

3

Video (yellow)

Audio L (white)

Audio R (red)

1Connect the cable from your satellite antenna to SATELLITE IN on your satellite receiver.

2Connect the coaxial cable from your cable service or antenna to the VHF/UHF jack on your TV.

3Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your satellite receiver to AUDIO/VIDEO IN on your TV.

You can use the button to switch between the VHF/UHF and VIDEO inputs.

For better picture quality, use S VIDEO instead of the yellow video cable. S VIDEO does not provide sound; you still must connect the audio cables.

12

Page 20
Image 20
Sony KV-27FS100 manual Connecting a TV and Satellite Receiver, Operating Instructions Optional connection, Rear of TV