Samsung HT-FS6200/XE manual Installing the Speakers on the Tallboy Stand, Connecting The Speakers

Installing the Speakers on the Tallboy Stand

1 Stand Base 2 3

Speaker

1.Turn the Stand Base upside-down and connect it to the Speaker as shown in the illustrator.

2.Use the driver to combine the screws on the 4 marked holes.

3.This is the appearance after the speaker is installed. Follow this steps to install another speaker.

Connecting The Speakers

1.Match each speaker cable bundle to the correct speaker by matching the colour coded plug on each bundle to the coloured sticker on the bottom of each speaker.

2.To attach speaker wire to each speaker:

a.Press down the red tab on the back of the speaker, insert the red wire, and then release the tab.

b.Press down the black tab on the back of the speaker, insert the black wire, and then release the tab.

3.Connect the speaker wire plugs from each speaker to the back of the product by matching the colours of the speaker plugs to the colours of the speaker jacks.

	Front Speaker (R)	SPEAKERS OUT		,03('$1&(Ÿ
Black	Red	FRONT R	FRONT L
		SUBWOOFER

Front Speaker (L)

Subwoofer	SPEAKERS OUT
	FRONT FRONT
	SUBWOOFER

HDMI OUT

CAUTION

If you want to install the product on the wall, fasten the screws or nails on the wall firmly and use the holes on the rear of speaker to install. However, when you install it, accessories (nails or screws) and installation is not provided by the company.

Do not let children play with or near the speakers. They could get hurt if a speaker falls.

When connecting the speaker wires to the speakers, make sure that the polarity (+/–) is correct.

Keep the subwoofer speaker out of reach of children to prevent children from inserting their hands or alien substances into the duct (hole) of the subwoofer speaker.

Do not hang the subwoofer on the wall using the duct (hole).

NOTES

If you place a speaker near your TV set, the screen colour may be distorted because of the magnetic field.

03 Connections

English 15