Installing the OmniAccess 740
Left running head:
Chapter name (automatic)
40 Beta Beta
OmniAccess 740 Hardware User’s Guide
Alcatel-Lucent
Figure 14: Installing Line Card
REMOVING THE LINE CARDS
To remove the line card, loosen the thumb screws provided on the line card and
pull the line card out of the slot.
INSTALLING FILLERS
Fillers are used to cover unused slots. The procedure to install different types of
fillers is outlined below.
Step 1: Insert the filler in the empty slot.
Step 2: Verify that the filler is rested on the guide and rides smoothly in the slot.
Step 3: Push the filler firmly and ensure that the filler is fully inserted in its
respective slot and tighten the screws.
REMOVING FILLERS
To remove the filler for the line card slots, loosen the thumb screws provided on
the line card and pull the filler out of the slot.
OA7-T1E1-4
OA7-6E-8
OA7-SE
OmniAccess
740
USB Modem Console