Installing the OmniAccess 740
Left running head:
Chapter name (automatic)
38 Beta Beta
OmniAccess 740 Hardware User’s Guide
Alcatel-Lucent
INSTALLING THE OA-740 IN THE RACK
Caution: Fully loaded, the OA-740 weighs 26.4 lbs (12.8 kgs). Do not try to mount the OA-740
chassis in the rack unassisted.
Caution: To prevent injury, review the safety precautions in the “Safety Measures” section
before installing the OA-740 in the rack.
To install the OA-740 chassis in the rack, complete the following steps:
Step 1: Ensure that the rack is stable, and verify that your path to the rack is
unobstructed.
Step 2: Ensure that the rack mount brackets are in the same level.
Step 3: Position the OA-740 chassis in front of the rack.
Step 4: Lift the OA-740 by the side of chassis, and slide the chassis into the rack.
Push it back until the brackets meet the mounting strips or posts on both sides of
the equipment rack. When the chassis is slid back all the way, make one or two
people hold the chassis in place.
Step 5: Insert the slotted screws (two screws per bracket) through the brackets
and into the mounting strip. Tighten all the screws.
Figure 12: Rack Mounting the OA-740
OA7-T1E1-4
OA7-6E-8
OA7-SE
OmniAccess
740
USBModem Console