Starting the OmniAccess 740
Left running head:
Chapter name (automatic)
52 Beta Beta
OmniAccess 740 Hardware User’s Guide
Alcatel-Lucent
CONNECTING THROUGH TELNET
Telnet is a user command and an underlying TCP/IP protocol for accessing
remote computers. Telnet allows you to log on as a regular user with preset
privileges to the specific application and data on that remote computer.
Figure 16: Connecting to Internal Network
To establish a Telnet session with the OA-740, follow the procedure below:
Step 1: Connect the RJ-45 cable from the Ethernet port in the SE card on the
front panel of the OA-740 to the internal router, switch, or hub in your LAN.
Step 2: Open a Telnet session, for example, to 192.168.1.1.
•From the Windows host, click Start > Run, type telnet 192.168.1.1, and click OK.
•From the Unix/Linux host, from the terminal window, type telnet 192.168.1.1 and
press the Enter key.
Step 3: Enter the username and password at the prompt.
You are now ready to access the OA-740, using a Telnet session.
USB ModemConsole
OmniAccess740