Additional TV Features
Setting up Dolby ProLogic
Before listening to Dolby Surround sound, you can adapt the Dolby features to suit your own taste. It is normal to set up the levels and modes of the speakers only when installing the TV and the speakers or when changing the position of the speakers.
1 Press the MENU button on the remote control to display the menu on the TV screen.
2 Move the OK button on the remote control DOWN to select the
symbol on the TV screen then move to RIGHT to enter the ‘PRESET‘ menu.
3 Move the OK button DOWN to select ‘Installation‘ then move the OK button RIGHT to enter the ‘INSTALLATION‘ menu.
4 Move the OK button DOWN to select ‘Dolby ProLogic Setup‘ then move RIGHT to enter the ‘DOLBY PROLOGIC SETUP‘ menu.
SCREEN MODE |
|
|
|
|
|
|
Screen Mode |
| [zoom | ] |
|
| |
Screen Position | [ | 0 | ] |
|
| |
|
|
|
| SCREEN MODE |
|
|
|
|
|
| Screen Mode | [zoom | ] |
|
|
|
| Screen Position [ 0 | ] | |
Strobe |
|
|
| Auto 16:9 | [on] |
|
|
|
|
| Strobe |
|
|
Auto 16:9 | [on] |
|
| Correction | [off] |
|
|
|
|
|
| ||
Correction | [off] |
|
|
|
|
|
PRESET
Auto Programme
Programme Setup
Manual Programme Preset
Programme Sorting
Parental Lock
Installation
INSTALLATION
Further Prog. Preset
AV Preset
Dolby ProLogic Setup
Picture Rotation
Digital Subtitles
5Move the OK button UP or DOWN to select ‘Level Settings‘ then DOLBY PROLOGIC SETUP
move RIGHT to confirm. |
|
| Level Settings . . . . . . . . . | |||||||
| ||||||||||
|
|
|
| Left |
| . . . . . | . . . . |
| ||
|
|
|
| Centre |
|
| . . . . . | . . . . |
| |
|
|
|
| Right |
| . . . . . | . . . . |
| ||
6 Select Left (left speaker), Centre (centre speaker), Right (right |
|
|
| Surround |
|
|
| |||
|
|
| Speaker Mode | [Normal] | ||||||
speaker) or Surround (surround speakers)by moving the OK |
|
| Delay Time | [20 ms ] | ||||||
| ||||||||||
|
| Auto Surround [off] | ||||||||
button UP or DOWN then move the OK button RIGHT to store. |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
7Adjust the level by moving the OK button RIGHT or LEFT.
8After you have adjusted the level, press the OK button to store the new level.
9Repeat steps 6 to 8 if you wish to adjust the sound levels of the other speakers (from your sitting position the sound output from all speakers should balance).
10Move the OK button LEFT.
11Select ‘Speaker mode‘ by moving the OK button DOWN then move the OK button RIGHT to enter.
12Push the OK button repeatedly DOWN to select:
Normal | – | all speakers are activated |
3 Wide | – | surround speakers are not used, centre |
|
| speaker carries full frequency response |
3 Normal – | surround speakers are not used | |
Wide | – | wider bandwidth for centre speaker |
Phantom | – | centre speaker is not used |
Press the OK button to store your choice.
13Select ’Delay Time’ by moving the OK button DOWN then move RIGHT to enter. Adjust the delay time of the surround speakers by moving the OK button UP or DOWN (e.g 20 ms
for standard rooms, 30 ms for small rooms)
15 ms n20 ms n25 ms n30 ms Press the OK button to store your choice.
14Select ’Auto Surround’ by moving the OK button DOWN then move RIGHT to enter. Move the OK button DOWN to select:
On - When receiving a Dolby Surround encoded programme, the TV switches automatically to Dolby Surround sound (depending on availability of service by broadcaster).
Off - normal
Press the OK button to store your choice.
15Press the MENU button on the remote control to remove the menu from the TV screen.
15