Quick Start Guide
6. Automatically tuning the TV
You can tune the TV to receive the new digital channels and/or the traditional analogue channels. If at any time during this procedure you want to return to the normal TV picture, press the MENU button.
1Press the MENU button on the remote control to display the menu on the TV screen.
2 Move the OK button on the remote control DOWN to select the 
symbol on the menu screen then move RIGHT to enter the ‘PRESET’ menu.
SCREEN MODE |
|
|
|
|
|
|
Screen Mode |
| [zoom | ] |
|
| |
Screen Position | [ | 0 | ] |
|
| |
|
|
|
| SCREEN MODE |
|
|
|
|
|
| Screen Mode | [zoom | ] |
|
|
|
| Screen Position [ 0 | ] | |
Strobe |
|
|
| Auto 16:9 | [on] |
|
|
|
|
| Strobe |
|
|
Auto 16:9 | [on] |
|
| Correction | [off] |
|
|
|
|
|
| ||
Correction | [off] |
|
|
|
|
|
PRESET
Auto Programme
Programme Setup
Manual Programme Preset
Programme Sorting
Parental Lock
Installation
3Move the OK button DOWN to select “Programme Setup” then move RIGHT to enter the ‘PROGRAMME SETUP’ menu.
4Move the OK button RIGHT to highlight the brackets then move repeatedly DOWN to select ‘Digital’ if you wish to view digital channels or ‘Analogue’ if you wish to view analogue channels.
5Press the OK button to confirm then move LEFT to display the PRESET menu.
6Move the OK button UP to select ‘Auto Programme’ then move the OK button RIGHT to display the “AUTO PROGRAMME” menu.
7Press the OK button to start the automatic tuning process. The word ‘searching’ now flashes on the menu screen and the TV starts to store all available channels. When tuning digital channels, please be patient and do not press any buttons as the tuning process takes approximately twenty minutes depending on the number of channels.
8When the autotune procedure is complete, the PRESET menu appears on the screen and the channel currently being broadcast on programme 1 is displayed.
9If you wish to tune in both the digital channels and the analogue channels, repeat steps
10Press the MENU button to remove the ‘PRESET’ menu from the TV screen.
Notes: • If you wish to stop the “autotune” procedure, press the OK button then the MENU button on the remote control.
•If, after tuning is complete, no digital programme is displayed on the TV, repeat steps
PROGRAMME SETUP
Programme Type | [Digital] |
PRESET
Auto Programme
Programme Setup
Manual Programme Preset
Programme Sorting
Parental Lock
Installation
AUTO PROGRAMME
START
| PROG | CH | SERVICE | |
| - - | 63 | S- - |
|
|
|
|
|
|
Searching |
| 26% complete | ||
PRESET
Auto Programme
Programme Setup
Manual Programme Preset
Programme Sorting
Parental Lock
Installation
PROGRAMME SETUP
Programme Type | [Analogue] |
9