Optional equipment
Connecting equipment to the TV
Using the following instructions, you can connect a wide range of optional equipment to your TV.
Connecting equipment to the TV
1.Connect your equipment to the correct TV socket as shown.
2.Press the button repeatedly on the remote control until the correct input symbol for your equipment appears on the TV screen:
Symbol | Input signals |
|
|
|
| |
1 | • Audio/video input signal through the scart connector |
|
| |||
| • RGB input signal through the scart connector |
|
| 8mm/Hi8 | ||
|
|
|
|
|
| |
2 | • Audio/video input signal through the scart connector | or the | camcorder | |||
| ||||||
| phono sockets | and |
|
|
| |
s 2 | • S video input signal through the scart connector | or the | A | |||
| ||||||
| sockets | and |
|
|
| B |
|
|
|
|
|
| |
3 | • Audio/video input signal through the scart connector |
| C | |||
|
|
|
|
|
| |
3. Switch on the connected equipment. |
|
| D |
4.To return to normal TV operation, keep pressing the button on the remote control until the TV picture appears.
Note: To avoid picture distortion, do not connect equipment to the , , and sockets at the same time.
Additional information when connecting equipment
Connecting a VCR
To record and playback digital programmes you must connect your VCR to the socket using a scart lead (the VCR relies on the TV to convert digital programmes to signals suitable for recording, which are then output from the TV via the scart socket).
To record analogue programmes on the VCR, connect your external aerial to the upper socket marked on the TV, then connect a lead from the RF input of the VCR to the lower aerial socket marked on the TV.
Note: If you have set the Auto 16:9 feature to ‘On’ (see page 14), any digital recording made from the socket will not detect the 16:9 mode, and during playback the picture will be displayed in the mode you previously selected from the ‘Format’ options.
Connecting headphones
Plug in your headphones to the socket of the concealed panel on the side of the TV.
DVD
Connecting to external audio equipment
Plug in your
For mono equipment
Connect the phono plug of your equipment to the L/G/S/I socket of the concealed panel on the side of the TV, then select the 2 input signal using the instructions on this page. Finally, refer to the ‘Adjusting the sound’ section of this manual and select ‘A’ on the sound menu screen.
D | D |
Integrated Digital TV |
P
-+
s
| 2 |
MONO |
|
L/G/S/I | 2 |
| |
R/D/D/D |
|
E | F | G | H |
|
|
| L/G/ |
|
|
| S/I |
|
|
| R/D/ |
|
|
| D/D |
|
|
| C |
|
|
| MODEM |
|
|
| S |
|
|
| S |
| 1 | 2 S 2 | 3 |
R/D/D/D | L/G/S/I |
|
|
PlayStation
Decoder
30