Getting started

4. Connecting the aerial

Connecting an aerial to your TV

Connect your existing aerial to the socket marked on the rear of the TV.

3

Connecting an aerial and VCR to your TV

3

Scart lead (not supplied)

 

OUT

 

IN

AC IN

AERIAL

 

ANTENNA

1 Connect your existing aerial to the upper socket marked on the rear of the TV as shown.

2Connect a lead from the RF input of your

VCR to the lower aerial socket marked on the TV.

3Connect the VCR to the mains socket and switch on.

4Insert a pre-recorded tape into the VCR and press the ‘PLAY’ button. This enables the TV set to locate and store the video channel during the ‘Automatically tuning the TV’ procedure.

5. Switching on the TV

Connect the TV plug to the mains socket (220-240V AC, 50Hz) and switch on.

D

Integrated Digital TV

Push in the on/off switch on the front of the TV.

D

6