continued...

Connecting Optional Equipment

Using the following instructions, you can connect a wide range of optional equipment to your TV set. (Connecting cables are not supplied).

Specifications 29LS30

TV system:

B/G/H, D/K

Colour system:

PAL, SECAM

NTSC 3.58, 4.43 (only Video In)

Sound Output:

2 x 14 W (music power)

2 x 7 W (RMS)

Woofer:

20 W (music power)

S VHS/Hi8/

DVC

camcorder

A

B

C

8mm/Hi8/DVC camcorder

 

F

 

E

 

VCR

D

Decoder

DVD

Hi-fi

 

1

2

“PlayStation”**

Channel Coverage:

VHF:

E2-E12

UHF:

E21-E69

CATV:

S1-S20

HYPER:

S21-S41

D/K:

R1-R12, R21-R69

Picture Tube:

Flat Display FD Trinitron

29” (approx. 73 cm. measured diagonally)

Rear Terminals

:1/

21-pin scart connector

10 W (RMS)

Power Consumption:

94 W

Standby Power Consumption:

0.5 W

Dimensions (w x h x d) : Approx. 771 x 592 x 553 mm.

Weight:

Approx. 49 Kg.

Accessories supplied:

1 Remote Control (RM-887)

10

**“PlayStation” is a product of Sony Computer

Entertainment, Inc.

** “PlayStation” is a trademark of Sony Computer Entertainment, Inc.

Decoder

(CENELEC standard)

including audio/video

input, RGB input, TV

audio/video output.

2 Batteries (IEC designated)

Other features:

• Teletext, Fastext, TOPtext

• Sleep Timer

Connecting a VCR:

To connect a VCR, please refer to the section “Connecting the aerial and VCR” of this instruction manual. We recommend you connect your VCR using a scart lead. If you do not have a scart lead, tune in the VCR test signal to TV programme number “0” by using “Manual Programme Preset” option. (for details how to manual programme, see page 13, step a).

Also refer to your VCR instruction manual to find out how to find the output channel of your VCR.

Connecting a VCR that supports Smartlink:

Smartlink is a direct link between the TV set and the VCR. For more information on Smartlink, please refer to the instruction manual of your VCR.

If you use a VCR that supports Smartlink, please connect the VCR by using a Scart lead to the Scart :2/q F.

:2/q 21-pin Scart connector (SMARTLINK) (CENELEC standard)

including audio / video input, S video input, selectable audio / video output and Smartlink interface.

audio outputs (Left/ Right) - phono jacks

Front Terminals

q3 S Video input - 4 pin DIN 3 video input – phono jack 3 audio input – phono jacks

headphones jack

• Smartlink (direct link between your TV set

and a compatible VCR. For more

information on Smartlink, please refer to

the Instruction Manual of your VCR).

• TV system Autodetection.

If you have connected a decoder to a VCR which supports Smartlink feature:

Select the “Manual Programme Preset” option in the “Set Up” menu and after entering in the

“Decoder*” option, select “On” (by using or ). Repeat this option for each scrambling signal.

*This option is only available depending on the country you have selected in the “Country” menu.

Design and specifications are subject to change without notice.

Ecological Paper- Totally Chlorine Free

20

Additional Information

Page 10
Image 10
Sony KV-29LS30E service manual Connecting Optional Equipment