Sony KV-29LS30E Board PWB Removal Step, Service Position Side Control Module Removal

2-4. A Board PWB Removal [ Step 1 ] 2-5. A Board PWB Removal [ Step 2 ]

Screw.

Remove the screw securing the PWB to the main bracket.

Clip.

Release the 5 securing clips located at the side and front of the chassis and slide the PWB clear of the bracket.

2-6. Service Position 2-7. Side Control Module Removal

Place the A Board PWB in the position indicated to carry out servicing.

Screws

Remove the two screws fixing the user control module to the side of the set. The control module can then be removed by sliding it towards the rear of the set allowing access to the H2 Board.

13