Connecting to external Audio Equipment:
Plug in your
Audio level of the external speakers can be modified by pressing the volume buttons on the remote control. Also treble and bass settings can be modified through the “Sound Adjustment” menu.
To enjoy “Dolby Virtual” sound effect through your
Place the speakers of your equipment in front of your listening position and beside the TV set but keeping a distance of 50 cm between each speaker and the TV set. Then by using the menu system, select the menu “Sound Adjustment”. Next select “Dolby Virtual” on the “Effect” option.
Left | Right |
speaker | speaker |
~50° 
Using Optional Equipment
1 Connect your equipment to the designated TV
socket, as indicated in the previous page. | Your sitting position | ||||||||||||
2 Switch on the connected equipment. | |||||||||||||
|
|
|
|
|
|
| |||||||
3 To watch the picture of the connected equipment, press the |
|
| button repeatedly until the | ||||||||||
| |||||||||||||
correct input symbol appears on the screen. |
|
|
|
|
|
|
| ||||||
Symbol | Input Signals |
|
|
|
|
|
|
| |||||
|
|
| 1 | • Audio / video input signal through the rear connector E. | |||||||||
| |||||||||||||
1 | • YUV input signal through the rear connector E. | ||||||||||||
|
|
| 2 | • Audio / video input signal through the rear connector F. | |||||||||
| |||||||||||||
2 | • YUV input signal through the rear connector F. | ||||||||||||
|
|
| 3 | • Audio/video input signal through the rear connector |
| and |
|
| |||||
|
|
| G1 | G3 | . | ||||||||
| |||||||||||||
|
|
| S 3 |
|
|
| |||||||
|
|
| • S Video Input signal through the rear connector | G2 | . This symbol appears | ||||||||
|
|
| |||||||||||
|
|
|
| only if an S Video source has been connected. |
|
|
|
|
|
|
| ||
|
| 4 | • Video input signal through the phono socket B and Audio input signal | ||||||||||
| |||||||||||||
|
|
|
| through C. |
|
|
|
|
|
|
| ||
|
|
| S 4 | • S Video Input signal through the front S Video input jack A and Audio | |||||||||
|
|
| |||||||||||
|
|
|
| signal through C. This symbol appears only if an S Video source has been | |||||||||
|
|
|
| connected. |
|
|
|
|
|
|
| ||
4 Press 
button on the remote control to return to the normal TV picture.
For Mono Equipment
Connect the phono plug to the L/G/S/I socket on the front of the TV and select 
4 or 
S 4 input signal using the instructions above. Finally, refer to the “Sound Adjustment” section of this manual and select “Dual Sound” “A” on the sound menu screen.
EN
Additional Information
19
