Level 1

Level 2

Level 3 / Function

Picture Adjustment

Mode: Personal

Contrast

Brightness

Colour

Sharpness

Hue

Reset

OK

Set Up

Auto Tuning

Programme Sorting

Progamme Labels

AV Preset

Manual Programme Preset

Detail Set Up

OK

Detail Set Up

 

Auto Format:

On

Noise Reduction:

Auto

AV3 Output:

TV

TV Speakers:

On

Picture Rotation:

0

PIP Input:

AV1

PIP Position:

 

 

OK

AV3 OUTPUT

The “AV3 Output” option in the “Detail Set Up” menu allows you to select the source to be output from the Scart connector 3/ S 3 so that you can record from this Scart any signal coming from the TV or from an external equipment connected to the Scart connectors

1/

1 or

2/

2 or side connectors

S 4 or

4 and

4.

 

If you select AV1 or AV2 and you use the supplied scart cable, it is necessary to connect all 6 lines of it.

To do this: after selecting the option, press . Then press or to select the desired output signal: TV, AV1, AV2, AV4, YC4 or AUTO.

If you select “AUTO”, the output signal will always be the same one that is displayed on the screen.

If you have connected a decoder directly to the Scart 3/ S 3 or to a VCR connected to this Scart, please remember to change back the “AV3 Output” to “AUTO” or “TV” for correct unscrambling. This is not necessary if you connect the decoder through the supplied scart adaptor.

EN

Picture Adjustment

Mode: Personal

Contrast

Brightness

Colour

Sharpness

Hue

Reset

OK

Set Up

Auto Tuning

Programme Sorting

Progamme Labels

AV Preset

Manual Programme Preset

Detail Set Up

OK

Detail Set Up

 

Auto Format:

On

Noise Reduction:

Auto

AV3 Output:

TV

TV Speakers:

On

Picture Rotation:

0

PIP Input:

AV1

PIP Position:

 

 

OK

TV SPEAKERS

The “TV Speakers” option in the “Detail Set Up” menu allows you to mute the TV speakers in order to listen to the TV from an external amplifier connected to the audio outputs on the rear of the TV set.

To do this: after selecting the option, press .

Then press or to select Off. Finally press OK to confirm and store.

To cancel this function afterwards, select “On” instead of “Off” in the step above.

Picture Adjustment

Mode: Personal

Contrast

Brightness

Colour

Sharpness

Hue

Reset

OK

Set Up

Auto Tuning

Programme Sorting

Progamme Labels

AV Preset

Manual Programme Preset

Detail Set Up

OK

Detail Set Up

 

Auto Format:

On

Noise Reduction:

Auto

AV3 Output:

TV

TV Speakers:

On

Picture Rotation:

0

PIP Input:

AV1

PIP Position:

 

 

OK

PICTURE ROTATION

Because of the earth’s magnetism, the picture might slant. If this is the case, you can correct the pictures slant by using the “Picture Rotation” option in the “Detail Set Up” menu.

To do this: after selecting the option, press . Then press or to correct any slant of the picture between -5 and +5.

continued...

Menu System

15

Page 14
Image 14
Sony KV-32LS65AUS instruction manual AV3 Output, TV Speakers, Picture Rotation