Programming the Remote Control

The remote control is preset to operate Sony brand video equipment.

Sony Equipment

Switch Position on

Programmable Code

 

Remote Control

Number

Beta, ED Beta VCRs

AV1

303

 

 

 

8 mm VCR

AV2

302

 

 

 

VHS VCR

AV3

301

 

 

 

DVD player

DVD

751

 

 

 

If you have video equipment other than Sony brand that you want to control with the TV’s remote control, use the following procedure to program the remote control.

✍The equipment must have infrared (IR) remote capability in order to be used with the remote control.

z

❑If more than one code number is listed, try entering them one by one until you come to the correct code for your equipment.

❑If you enter a new code number, the code number you previously entered at that setting is erased.

❑In some cases, you may not be able to operate your equipment with the supplied remote control. In such cases, use the equipment’s own remote control unit.

❑Whenever you remove the batteries to replace them, the code numbers may revert to the factory setting and must be reset.

1Turn to the list of “Manufacturer’s Codes” on page 44, and find the three-digit code number for the manufacturer of your equipment. (If more than one code number is listed, use the number listed first.)

2Set the A/V slide switch to 1, 2, 3, or DVD.

3Press CODE SET.

4Enter the three-digit manufacturer’s code number.

5Press ENTER.

✍You must do step 5 within 10 seconds of step 4, or you must redo steps 3 through 5.

6To check if the code number works, aim the TV’s remote control at the equipment and press the POWER button that corresponds with that equipment. If it responds, you are done. If not, try using another code listed for that manufacturer.

SETUP Control Remote

SETUP

43