Sony KV-30HS510, KV-34HS51 89

Welcome

SETUP

Other Info

General

Problem	Possible Remedies
How to reset TV to	❏	Turn on the TV. While holding down the RESET button on the remote
factory settings		control, press the POWER button on the TV. (The TV will turn itself off, then
		back on again.) Release the RESET button.

How to restore Video settings ❏		Press the RESET button on the remote control while in the Video Menu (see
to factory settings		page 66).
How to restore Audio	❏	Press the RESET button on the remote control while in the Audio Menu (see
settings to factory settings		page 68).
Cannot cycle through the	❏	Be sure the Video Label option is not set to Skip (see page 78).
other video equipment
connected to the TV
Cannot operate Menu	❏	If a menu option appears in gray, this indicates that the TV is in a state in
		which the menu option is not available.

Lost password	❏	In the password screen (see page 74), enter the following master password:
		4357. The master password clears your previous password; it cannot be
		used to temporarily unblock channels.
TV makes “popping” sound ❏		This is a normal sound that results from the TV automatically degaussing
when turned on		each time it is turned on.
LED on front panel is lit	❏	The STAND BY LED (see page 11) blinks when the TV is turned on, then
		shuts off when the picture is displayed. If the LED blinks continuously, this
		may indicate the TV needs service.
	❏	The TIMER LED (see page 11) indicates that the timer is set (page 79).
		When the timer is set, this LED will remain lit even when the TV is turned
		off.
Digital cable box does not	❏	Be sure that you have not connected the digital cable box to the TV’s TO
work		CONVERTER jack. This jack is not compatible with digital cable boxes.
	❏	If you are connecting a VCR and digital cable box using a splitter, as
		described on pages 24-25,you must use a special bi-directional splitter that
		is designed to work with your digital cable box. Contact your cable
		provider for details.