Notes on Using This Connection

To Do This ...

Do This ...

Watch the satellite receiver

Press TV/VIDEO repeatedly to select the VCR input (VIDEO 1 in the

 

illustration).

 

The VCR must be turned on and set to the satellite receiver’s line input.

 

 

Watch the VCR

Press TV/VIDEO repeatedly to select the input to which the VCR is connected

 

(VIDEO 1 in the illustration).

 

 

Set up the TV remote control

If you have a non-Sony VCR or satellite receiver, you must program the

to operate the satellite

remote control. See “Programming the Remote Control” on pages 43-44.

receiver or VCR

 

 

 

Activate the TV remote

For the satellite receiver, press SAT/CABLE FUNCTION. For the VCR, open the

control to operate the satellite

outside cover, as shown on page 42. Then set the A/V slide switch to the

receiver or VCR

position you programmed for the VCR.

 

 

Control satellite receiver and

See “Operating a Satellite Receiver” on page 62 and “Operating a VCR” on

VCR functions with the TV

page 62.

remote control

 

 

 

Label video inputs to easily

See the instructions for setting up Video Labels on page 78.

identify equipment connected

 

to the TV

 

 

 

Setup

SETUP

SETUP

SETUP

SETUP

31