Sony KV-DB29, KV-DB29M91, KV-DB29M98 xChanging the “Picture” setting

xChanging the “Picture” setting

The “Picture” menu allows you to adjust the picture settings.

1 Press WEGA GATE and select “Settings”.

2	Make sure the “Picture” icon ( ) is		Picture
	selected, then press	.	DRC-MF:	DRC1250
			Picture Mode:	Vivid
			Picture Adjustment
			3D Intelligent Picture:		On
		Select	Confirm	End
3 Press V or v to select the desired item (e.g., “DRC-MF”), then press .
	Select	To
	“DRC-MF”	choose either “DRC1250” (for high density pictures), “DRC100”
		(reduce flicker on the screen) or “Progressive” (reduce jitter of
		any small areas or scanning lines on the screen).
	“Picture Mode”	choose either “Vivid”, “Standard” or “Custom”* (see page 11).
	“3D Intelligent Picture”	optimize picture quality.
	(KV-DB29M98 only)	Automatically, the picture will become clearer and sharper if the
		signal is good and noise will be reduced if the signal is noisy.
		Press V or v to select “On”, then press .
		To cancel, select “Off”, then press .
	“Intelligent Picture”	optimize picture quality.
	(KV-DB29M91 only)	Press V or v to select “On”, then press .
		To cancel, select “Off”, then press .
	“NR”	optimize overall picture sharpness to reduce noise.
	(Noise Reduction)	Choose either “High”, “Low” or “Off”.
	(KV-DB29M91 only)

*You can adjust the setting to your personal preference in the “Picture Adjustment” option only when the “Custom” mode is selected (see page 20).

Notes

•The DRC-MF mode is not selectable when “Game Mode” mode is turned “On”. The mode is not available for HD (high-definition) and progressive input signals.

•“3D Intelligent Picture” is not available in HD and progressive input signal (KV-DB29M98 only).

•For NTSC 3.58 color system, “3D Comb Filter: On” or “3D-NR: On” display will appear when “3D Intelligent Picture” changes from one mode to the other. For PAL color system, Digital Comb Filter and 3D-NR are also available (KV-DB29M98 only).

•“NR” is not selectable when receiving signals through the (S video input) or (component video input) terminals (KV-DB29M91 only).

The DRC-MF logo (	) and “DRC-MF” are trademarks of Sony
Corporation.		continue
	Menu Adjustment		19