xGetting Started
Step 1
| Insert the batteries (supplied) into the remote. |
b | Note |
| |
| • Do not use old or different types of batteries together. |
Step 2
Connect the antenna cable (not supplied) to 8 (antenna input) at the rear of the TV.
Tip•You can also connect your TV to other optional components (see page 28).
Installation
b
Step 3
Plug in the power cord, then press ! on the TV to turn it on.
Note
•The 1(standby) indicator flashes green for a few seconds when turning on the TV. This does not indicate a malfunction.
Step 4
Set up the TV by following the instructions of the “Начальная настройкa“ (“Initial Setup”) menu (see page 6).
Installation 5