d)If you wish to edit the channels, press to change to edit mode.
Press b until the mode that you wish to edit is highlighted: Label, Skip, (block symbol). Then press .
1)To label, press V or v to select the alphanumeric characters for the label. Then press .
2)To skip the program number, press V or v to select “On”. Then press .
You can skip this program number when using PROG
3)To block unwanted program number, press V or v to select . Then press .
e)Repeat step b) to d) if you wish to change other channels.
Press WEGA GATE to go to the next menu.
05
Select | Confirm | Exit |
05
Select | Confirm | Exit |
Select | Confirm | Exit |
4 Press B or b to adjust the bars on the top and bottom of the menu if they are slanted, then press .
“Picture
Select Confirm End
5 | If the upper and lower bars are not |
|
| equally positioned to the top and |
|
| bottom of the screen, press V or v to |
|
| adjust them, then press . | Select Confirm End |
If no adjustment is necessary, then press .
6 | To prevent this “Initial Setup” menu from |
|
|
| appearing again when you turn on the TV |
|
|
| by pressing !, press V or v to select “No”, |
|
|
| then press . |
|
|
| To allow this menu to appear again, select | Select | Confirm |
| “Yes”, then press . |
|
|
Tip
• You can immediately go to the end of the “Initial Setup” menu by pressing WEGA GATE.
Note
•Before adjusting “Picture Rotation” and “Picture
Installation 7