2-8. PICTURE TUBE REMOVAL

3 F board

4C3 Board

7Neck assy

5 Deflection yoke 2 A board

6Four screws (Tapping screws)

 

21–

1 Anode cap

 

Cushion

REMOVAL OF ANODE-CAP

NOTE : After removing the anode, short circuit the anode of the picture tube and the anode cap to the metal chassis, CRT shield or carbon paint on the CRT.

REMOVING PROCEDURES

a a

1Turn up one side of the rubber cap in the direction indicated by the arrow a.

b

b

2Using a thumb pull up the rubber cap firmly in the direction indicated by the arrow b.

c

Anode button

3When one side of the rubber cap is separated from the anode button, the anode-cap can be removed by turning up the rubber cap and pulling it up in the direction of the arrow c.

HOW TO HANDLE AN ANODE-CAP

1Do not damage the surface of anode-caps with sharp shaped objects.

2Do not press the rubber too hard so as not to damage the inside of anode-cap. A metal fitting called the shatter-hook terminal is built into the rubber.

3Do not turn the foot of rubber over too hard.

The shatter-hook terminal will stick out or damage the rubber.

KV-HF21M80

RM-952

Page 21
Image 21
Sony KV-HF21M80 service manual Picture Tube Removal, Removal of ANODE-CAP Removing Procedures