– 9 –
Notes
•If you connect a monaural VCR, connect the yellow plug to 
(the yellow jack) and the black plug to 
•If you connect a VCR to the ˘ (antenna) terminal, preset the signal output from the VCR to the program number 0 on the TV.
•When no signal is input to the connected video equipment, the TV screen becomes blue.
CAUTION Do not connect the power cord until you have completed making all other connections; otherwise a minimum leakage current might flow through the antenna and other terminals to ground. Step 2
Insert the batteries into the remote
Note
•Do not use old batteries nor use different types of batteries together.
Step 3 |
|
|
Preset the channels automatically |
|
|
Front of TV |
|
|
1 |
|
|
2 | 1 | 1 |
| VHF LOW B/G |
|
|
| |
Tips |
|
|
•If you want to stop automatic channel presetting, press SELECT twice.
•If your TV has preset an unwanted channel or cannot preset a particular channel, then preset your TV manually (see page 10).
Note
•During automatic channel presetting, your TV screen will indicate “B/G” , “I”, “D/K” or “M” for the TV system (“TV SYS”).
Now You Are Ready. . .
To watch your TV, see page 12.
Using Your New TV
Connecting the 3D WOOFER
You can enjoy high quality sound by connecting the 3D WOOFER.
3D WOOFER Rear of TV
1 
2
Black wire
Red wire
1 | Attach the 3D WOOFER into the footholds on the top of your TV. | |
| ||
2 | Connect the wires to the 3D WOOFER (8Ω | ) terminals at the rear of your TV. |
| ||
| The red wire should be connected to the ‘ red terminal and the black wire | |
| to the ’ black terminal. |
|
| Notes |
|
•Connect only the supplied 3D WOOFER; otherwise your TV may malfunction.
•Unplug your TV from the wall outlet when connecting the 3D WOOFER.
•To prevent a malfunction caused by a short circuit of the terminals, make sure that none of the 3D WOOFER wire strands stick out, making contact with the neighbouring speaker terminal.
Using Your New TV | 5 | 6 | Using Your New TV |
|
|
|
|
