Connecting Your TV
Connecting Additional Equipment
TV and VCR
Rear of TV
2
VCR |
1 |
From |
cable/antenna |
Video (yellow)
Audio L (white)
Audio R (red)
Optional connection
To watch video programs from your VCR, tune your TV to channel 3 or 4 (as set on the rear of your VCR).
1 Connect the coaxial cable from your TV antenna or cable service to the IN jack on your VCR.
2 Connect a coaxial cable (not supplied) from the OUT jack on your VCR to the VHF/UHF jack on the TV.
Optional connection
If your VCR is equipped with video outputs, you can get better picture quality by connecting Audio/Video cables (not supplied) from AUDIO and VIDEO OUT on your VCR to AUDIO/VIDEO IN on your TV.
You can use the 
button to switch between the VHF/UHF and VIDEO inputs.
For better picture quality, use S VIDEO instead of the yellow Audio/ Video cable. S VIDEO does not provide sound; the audio cables must still be connected.
5
