Sony KV 27FS320 manual Programming the Remote Control

Programming the Remote Control

If you have video equipment other than Sony brand (or if you have a Sony DVD/VCR combination unit) that you want to control with the TV’s remote control, use the following procedure to program the remote control.

1 Check the list of “Manufacturer’s Codes” on page 6 and find the three-digit code number for the manufacturer of your component. If more than one code number is listed, use the number listed first.

2 Press .

✍The and FUNCTION button will flash when you press .

3 Press or FUNCTION button to indicate the type of component you want to program with the remote control.

✍You must do step 4 within 10 seconds of step 3, or you must redo steps 2 and 3.

4 Use the 0 9 buttons to enter the three-digit manufacturer’s code number.

5 Press .

6 To check if the code number works, aim the TV’s remote control at the component and press the green POWER button (VCR/DVD, SAT/CABLE) that corresponds with that component. If it responds, you are done. If not try using another code listed for that manufacturer.

✍If you have problems programming your remote control, see “Troubleshooting” on page 52.

Remote Control

5