Remote control of the K1 AV
The F6 remote control handset controls all the functions of the K1 AV. The adjustments you make are displayed on the machine’s integral screen and also on any TV set which is connected to the system.
ON
This button switches the K1 AV on and off.
• If the system is being operated in
•If the system is set to
Volume control
Rocker switches for volume control: a brief press changes the volume by one increment. If the rocker is held in one position, the volume changes continuously until it is released again. The screen briefly displays the current volume value.
Loudspeaker outputs
This button toggles the loudspeaker outputs on and off. The speaker groups are switched OFF in the following sequence: A (main room), B (adjacent room), A + B (main and adjacent rooms), OFF. The corresponding symbols light up on the K1 AV’s integral screen to indicate the current operating mode.
A long press on the button switches all the loudspeaker groups off directly (Mute setting).
Selecting the listening source
Pressing a source button selects the corresponding device as the listening source, even if the K1 AV was previously switched off. The signal from this source is then reproduced by the system.
It is only possible to remotely control the device which is currently selected as the listening source.
Selects the integral disc player.
Selects the integral tuner.
Selects the AUX input.
Selects the TAPE input (recording device).
Selects the TV set connected to the Scart socket.
When you switch to a new listening source, the screen briefly displays the new source. After this it reverts to a standard
Playback mode
Cycles through the playback modes when the button is repeatedly pressed.
STEREO Stereo playback via the left and right loudspeakers MUSIC
It is only possible to set the playback mode if a Centre loudspeaker is present in the system, and if it has been activated in the 'Amplifier Setup menu / Centre loudspeaker').
brief press: | Amplifier |
long press: | Amplifier Setup menu |
8
