T+A Elektroakustik K1 AV Digital Audio-Setup, Digital Output, Sound Mode, Only Pcm, LPCM output

DIGITAL AUDIO-SETUP

Adjustment facility

DIGITAL AUDIO-SETUP

DIGITAL OUTPUT LPCM

ALL

48 K

ONLY PCM

96 K

DIGITAL OUTPUT

The digital output of the K1 AV can be used for connecting external surround decoders or digital recording equipment. Set the data format of the digital output to suit the requirements of the devices to be connected to the unit.

ALL

Select this setting of you have connected an external surround decoder to the ‘Digital Audio Out’ output.

ONLY PCM

Select this setting if the connected device is not capable of decoding multi-channel audio. It should be used, for example, with digital stereo audio recorders (DAT, CD recorder, MD recorder).

LPCM output

At this point you can activate the 96 kHz setting for the digital output.

If you activate the 96 kHz output, audio signals from DVDs featuring a 96 kHz sound track are reproduced in their native 96 kHz format. Please note that the decoder or recorder connected to the K1 AV must also be designed for 96 kHz operation, and must also be set to that value (see the operating instructions supplied with the decoder / recorder).

Caution:If your decoder does not support the 96 kHz data rate, it is essential to set the 48 kHz setting in this menu point, as your decoder is not capable of reproducing the audio data correctly. If you use the system with the wrong settings, under unfavourable circumstances your loudspeakers could be damaged.

SOUND MODE

The K1 AV features a room sound processor which can create an artificial room sound atmosphere when playing DVDs (film mode) and CDs (music mode). For film and music reproduction various sound programs are available which you can select at this menu point.

28