T+A Elektroakustik K1 AV user manual Video Setup, Tv Type, Tv Display, Multi, Ntsc, 4 3 Pan Scan

Video Setup

Adjustment facility

TV TYPE		MULTI
	PAL
TV DISPLAY
	4:3 PAN SCAN	OFF
PROGRESSIVE
	ON
PICTURE SETTING		BRIGHT
	STANDARD
COMPONENT		RGB
	YUV

TV TYPE

This menu contains the options for selecting the TV norm, which must be set to match your monitor or television screen.

PAL

Select this setting if the picture output is to be reproduced on a PAL TV set. At this setting, DVDs in NTSC format will be converted to the PAL format by the K1 AV.

Multi

At this setting the K1 AV carries out no format conversion. The output from PAL DVDs is reproduced as PAL, NTSC DVDs as NTSC.

This setting should only be selected if your television set is a multi-norm type, i.e. one which automatically switches between PAL and NTSC modes.

NTSC

Select this setting if the picture output is to be reproduced on an NTSC television. At this setting, DVDs in PAL format will be converted to the NTSC format by the K1 AV.

NTSC

16:9

SOFTPERSONAL

TV DISPLAY

In this menu you set the picture output of the K1 AV to match the geometry of your TV set.

Note:

The format which you select must be available on the disc. If this is not the case, the selected picture format settings will have no effect on the picture during playback.

4:3 Pan Scan

This produces a picture of full screen height; if a wide- screen film is played, the centre of the picture fills the screen of a 4:3 TV set. Less important areas of the picture are cropped.

 Pan Scan is only supported by a few DVDs

4:3 Letterbox

This option produces a ”wide-screen” reproduction with black bars at the top and bottom of the picture. In this setting the entire picture content of the DVD is reproduced.

We recommend this setting for use with 4:3 televisions.

16:9 (wide-screen)

For reproduction on a wide-screen television (16 : 9 format).

29