T+A Elektroakustik K1 AV user manual vol a/b, Explanation, Operation

vol a/b

Amplifier Setup Menu point Volume setting, separate

Explanation:

Normally the volume for the loudspeaker outputs A and B is controlled in parallel.

However, if you connect the E2000 external remote control receiver, and if a pair of loudspeakers is connected to loudspeaker terminals B (preferably in an adjacent room), this menu point can be used to set up separate volume control for the loudspeaker pairs

A and B.

If the multi-room option is selected, only the speakers in the operator’s room will be activated when you switch on the K1 AV; the other pair of speakers remains muted.

The volume for A can only be adjusted using the buttons on the machine, or via the integral remote control receiver.

The volume for B can only be adjusted using the external remote control receiver (see also the chapter 'Multi-room mode').

Operation:

The screen shows the current status of the system:

'VOL A/B' separate volume control for multi-room use. or

'VOL A+B' parallel volume control for single-room use.

Select your preferred option using the buttons or . The menu closes when you press the button.

If the menu control buttons (, , , , or ) are not operated for a period of about ten seconds, the amplifier interrupts the menu (Timeout) and reverts to the normal screen display.

37